The New Appraisal Is Here. Here’s How to Read It.

Think about the last appraisal you read. You probably didn’t read it at all. You flipped straight to the bottom of page 2, found the number, and exhaled.

That habit just retired.

As of yesterday, November 2, 2026, the new appraisal format is mandatory for new reports on conventional loans sold to Fannie Mae and Freddie Mac. The familiar 1004 and its cousins are being replaced by one dynamic report under the new Uniform Appraisal Dataset, UAD 3.6. And if you open one expecting the old layout, you are going to feel a little lost.

The best visual walkthrough I have seen comes from Terra Breeden at Class Valuation, in UAD 3.6: A Complete Guide to the New Report (with Pictures). It recaps a webinar featuring Freddie Mac Chief Appraiser Scott Reuter, and it puts the old and new reports side by side. I want to translate it for the people who actually live with appraisals every day: Realtors, loan officers, and the buyers we serve.

First, What Actually Changed on November 2

New appraisals submitted to the GSEs’ portal now have to use UAD 3.6. The date that counts is when the report is first submitted, not when the loan application came in. A few nuances matter:

  • Some lenders are still on the old format for now. Lenders with an approved temporary exception can keep ordering legacy reports into 2027, so you may see both formats for a while. (I covered that in The $300 Appraisal Surprise.)
  • FHA, VA and USDA have not switched yet. They have said they intend to adopt the new format, but for now your VA and FHA buyers will still see the familiar forms. Here in the Fort Campbell market, that means two report styles crossing your desk at the same time.

From a Rack of Forms to One Tailored Report

The old system worked like buying a suit off the rack. Single family home? 1004. Condo? 1073. Two to four units? 1025. You picked the closest form and made it fit, and sometimes a property simply didn’t fit any of them.

UAD 3.6 is the tailor. The lender orders based on what the property actually is (units, ADUs, condo or single family) and the scope of work (interior, exterior, desktop, hybrid, update or completion). The technology then builds one report from the data that applies. Class Valuation notes that separating the property from the assignment this way means more loans should be eligible for sale to Fannie and Freddie. That is good news for unusual properties.

Start on Page One. That Is Where the Story Lives Now.

This is the change I am most excited about. The old report scattered the important stuff. The value sat at the bottom of page 2. Property problems could hide in a comment box or a long addendum.

The new report opens with a summary page: the opinion of value, the market value condition, and the key property facts, all in one place. It also includes a table of apparent defects, damages and deficiencies right up front.

Realtors, read that twice. The repair conversation used to start when an underwriter dug something out of page 4. Now it starts on page 1, where everyone sees it at a glance. My advice? Walk your listings with fresh eyes before the appraiser does. A loose handrail you fix today is a line that never shows up in that table.

A Missing Section Is Not a Missing Piece

The old forms showed every section, every time, in the same order, whether it applied or not. The new report only shows the sections that fit the property and the assignment. Photos and comments now sit inside the section they describe instead of piling up at the back.

So if you don’t see a condo section on a single family home, nothing is wrong. The better question is no longer “what’s on page 3?” It is “which sections should be here for this file?”

New Words, Same Ideas

This is where muscle memory trips people up. The concepts are the same. The labels changed. Here is your cheat sheet:

  • Arm’s length transaction is now typically motivated.
  • Location is now site influenced.
  • Age becomes year built.
  • Garage rolls up under vehicle storage.
  • GLA becomes finished above-grade area, broken out by level, with below-grade space reported separately under ANSI measurement standards.

That last one is worth a pause. If your listing counts a finished basement or bonus room in the square footage, don’t be surprised if the appraisal breaks it out differently. A new label is not a new policy. Ask before you panic.

Six Products, One Family

Instead of a drawer full of form numbers, UAD 3.6 offers six core products: traditional, desktop, hybrid, exterior-only, appraisal update and completion report. The old 1004D used to handle both updates and completions. Now those are two separate products, so ask which one was ordered.

Investors, this one is for you. The rent schedule that used to arrive as a separate 1007 now usually lives inside the report as its own section. If you are waiting on a separate rent PDF, it may already be in your hands.

A Grid That Shows Its Work

Under the old sales grid, an appraiser might roll several differences into one lump adjustment. Everyone downstream had to guess what drove it. The new grid gives key features their own lines and their own adjustments, and items that don’t apply are clearly dashed out.

That transparency should mean fewer back-and-forth revision requests, because reviewers can see exactly which feature moved the number. It pairs nicely with my earlier post on how appraisers now have to show their math on market trends.

The Deeper Principle: Clarity Builds Confidence

Every change here points in the same direction. Put the important information first. Show the reasoning. Connect the photo to the problem it describes. That is what good communication looks like, and it is what clients have always wanted from us.

Will it feel clunky at first? Sure. Class Valuation suggests it takes about five or six reports before you feel comfortable. That is a temporary learning curve, not a permanent problem.

What I Would Do This Week

  • Realtors: Ask your lender which format they are ordering. Pre-walk your listings for visible defects. Give your sellers a heads-up that square footage may be reported differently.
  • Loan officers: Update your checklists to start with “which sections apply?” Tape the terminology cheat sheet to your monitor. Look for the rent schedule inside the report before you chase a 1007.
  • Buyers: Read page one of your appraisal. Value, condition and any concerns are all right there. If something doesn’t make sense, ask. That is what we are here for.

Forms change. People don’t. Your buyer still wants to know one thing: is my home worth what I am paying, and is there anything I should worry about? The new report finally answers that on the first page.

Knowledge is power. So here is my challenge: the next time a UAD 3.6 report lands in your inbox, don’t scroll for the number. Read page one first. And if you want someone to walk through one with you, just call Kate at (931) 980-9764.

Frequently Asked Questions About the New UAD 3.6 Appraisal Report

1. What is UAD 3.6?

UAD 3.6 is the updated Uniform Appraisal Dataset from Fannie Mae and Freddie Mac. It replaces the legacy appraisal forms with a single, data-driven report called the redesigned Uniform Residential Appraisal Report (URAR).

2. When did UAD 3.6 become mandatory?

November 2, 2026, for new appraisal reports submitted to the GSEs on conventional loans. The mandate is based on when the report is first submitted, not when the loan application was taken.

3. Why might I still see old-style appraisals?

Some lenders received a temporary exception to keep ordering the legacy format into 2027. FHA, VA and USDA loans also still use the familiar forms for now, though those agencies plan to adopt the new format later.

4. Where do I find the appraised value now?

On the summary page at the front of the report, along with the market value condition and key property facts. You no longer need to hunt for it at the bottom of page 2.

5. What is the defects, damages and deficiencies table?

It is a table near the front of the report that lists apparent issues the appraiser observed. It helps underwriters, agents and buyers see potential repair items right away instead of finding them buried in comments.

6. Does a missing section mean the appraisal is incomplete?

Not necessarily. The new report only includes sections that apply to the property and the assignment. A condo section won’t appear on a single family home, for example.

7. What happened to “GLA” and “arm’s length”?

GLA is now reported as finished above-grade area by level, with below-grade space shown separately. Arm’s length is now described as “typically motivated.” The concepts are the same, only the labels changed.

8. Could the appraisal square footage differ from my listing?

It can, especially for finished basements and other below-grade space, since the new report follows ANSI measurement standards and separates above-grade from below-grade area. Talk with your lender before assuming the value is affected.

9. Is the rent schedule still a separate form?

In most cases, no. The rent schedule is now a section inside the UAD 3.6 report, and the separate 1007 is reserved for limited situations.

10. How long does it take to get comfortable reading the new report?

Class Valuation estimates about five or six reports. Start with the summary page, use a terminology cheat sheet, and ask your loan officer to walk through your first few with you.


Source: Terra Breeden, “UAD 3.6: A Complete Guide to the New Report (with Pictures),” Class Valuation, August 27, 2026, recapping the Class Valuation webinar “UAD 3.6: Your Roadmap to November.” Visit the original article for side-by-side images of the old and new reports.

This article is for educational purposes only and is not a commitment to lend. Appraisal requirements, fees, turn times and program availability vary and are subject to change. Kate Deiboldt, Senior Mortgage Advisor | VanDyk Mortgage Corporation | NMLS #18487 | Company NMLS #3035 | (931) 980-9764 | Kate@VanDykMortgage.com | Licensed in TN, KY, AL, FL, GA, TX and IL | Equal Housing Lender | www.nmlsconsumeraccess.org

Comments

Leave a Reply